Foredeck fitted

The foredeck is now fitted and the rowlocks are fixed on, so just a epoxy/glass mat on the outside and a paint needed then we'll be afloat!

Forward Bulkhead fitted

Just when you think you are nearly done then is always more little jobs to do. With the forward bulkhead fitted, I realised that we needed another strip on the bulkhead to take the foredeck.

Seats complete

Seat are complete, and the fore deck is about to be fitted. It is all taking shape - between showers!

Seats taking shape

A let up in the recent rain has brought the dinghy out of the shed to make it easier for me to fit the vertical sections of the centre thwart. The rear seat is already in place.

Proper stitching

I managed to stitch the dinghy up properly today and pull it into shape ready for filleting the joints with epoxy resin. It looks like a dinghy now!

Stitching the Tender

A fiddly time was had when I roughly stitched the bottom, sides, bow and stern sections of the tender together. Hopefully it will all come together with more ties and a bit of gentle persuasion!

The TENDER

Every yacht needs a tender (dinghy) to get ashore in, so rather than get a dreadful inflatable, I thought I'd make one. The plans were courtesy of Richard Woods, free in his design book. I was going to make this indoors, but decided I might not be able to get it out of the house once built, so it will be a shed job. The bottom, sides, bow and stern are all cut out of 4mm ply. If feels very thin, but I know from experience of building canoes that once joined together, it will become very strong. Next stage - stitching it all together with cable ties.